CAD-COLOUR Silver
Description / CAD-COLOUR Silver
STAHLS' Silver Printable HTV
Give any garment an exciting metallic effect!
Stahls’ Cad-Colour Silver has been specially developed for the printing of textiles with a metallic effect.
This thin, silver film material is soft to the touch and adds a fashion look to any design. Show your colours with brilliant shine and make an impact anywhere and everywhere.
Available in 50cm width x 25m rolls.
Recommended Fabrics:
- Poly/Cotton Blends
- 100% polyester*
- Softshell*
*Testing is always advised
Silver Printable Benefits:
- Metallic Effect
- Lightweight
- Soft Touch
- 50+ washes
Application Instructions:
- Time: 12 seconds
- Temp: 150°c
- Pressure: Medium (4-6 on a Hotronix Press)
- Peel: Warm
Recommended tools and accessories :
Cutting Tips:
- Always carry out a Test-Cut, this will identify if you have a sharp blade and if the pressure and force is correct.
- Once you have the correct setting, make a visual note and attach it to your cutter for each type of material.
- Different HTV materials require different blades, always have a selection to hand.
Weeding Tips & Tricks:
Weeding your vinyl can be time consuming, with the right techniques and tricks of the trade you can boost efficiency and get more done in less time.
- There's a right way and a wrong way to weed your heat transfer vinyl. Learn the right way so you can get more done in less time.
Instructions
Application Instructions:
Temp: 150°c
Time 1st : 12 seconds peel mask
Pressure: Medium (#4-6 on Hotronix®)
Peel: Warm
Care Instructions:
For best results, turn the garment inside out.
Machine wash up to 40°c using mild detergent.
Do not use bleach.
Do not iron directly on transfer.
Tumble dry at low setting.
Do not dry-clean.
Natural distressing can occur with repeated washings.
Storage Store in a cool, dry area.
Avoid direct heat, sunlight and humidity.
Support
Need some help?
| Sales | 01376 32 63 51 |
|---|